Unblocktech UBox Gen 2 blue screen issue
owen
TV Nuts
My UB Box came today & just connected, ... but not sure why keep flash on the first start up screen (Asking English, Cantonese or Mandarin language)??
Post edited by padman on
Comments
owen Wrote:
> My UB Box came today & just connected, ... but
> not sure why keep flash on the first start up
> screen (Asking English, Cantonese or Mandarin
> language)??
I guess the only thing you could do is continue
owen Wrote:
> Blue ... Flashing Blue blank screen.... then
> start up screen asking the (Asking English,
> Cantonese or Mandarin language) ...... then
> Flashing Blue blank screen again .... keep
> continue ....??
padman Wrote:
> Strange, shouldn't be related to the tv.
>
> I guess the only thing you could do is continue
>
> owen Wrote:
>
>
> > Blue ... Flashing Blue blank screen.... then
> > start up screen asking the (Asking English,
> > Cantonese or Mandarin language) ...... then
> > Flashing Blue blank screen again .... keep
> > continue ....??
owen Wrote:
> Mine is called Gen.2_S8000plus_Overseas. Still
> cannot see when I power it up. Flashing on the
> screen during the main menu choose Languages.
I did try it on my 22 lcd monitor with HDMI input. It works & NO flashing on main menu.
Does it mean my Samsung 55 LCD doesn't work with this little toy?
owen Wrote:
> The same thing. I can press the setting up button
> & select different mode ( 1080 50mz). But when I
> return to the home menu, it keep flashing.
>
> I did try it on my 22 lcd monitor with HDMI input.
> It works & NO flashing on main menu.
>
> Does it mean my Samsung 55 LCD doesn't work with
> this little toy?
I used BOTH (Original HTMI cable from Ubox & other from TVPAD 3). Not sure is my Samsung 55 TV LCD issues since it works on my 24 Acer LCD monitor with HDMI input.
padman Wrote:
> That's very strange. Do you have another hdmi
> cable you can try ?
>
>
> owen Wrote:
>
>
> > The same thing. I can press the setting up
> button
> > & select different mode ( 1080 50mz). But when
> I
> > return to the home menu, it keep flashing.
> >
> > I did try it on my 22 lcd monitor with HDMI
> input.
> > It works & NO flashing on main menu.
> >
> > Does it mean my Samsung 55 LCD doesn't work
> with
> > this little toy?
> Padman.
> I used BOTH (Original HTMI cable from Ubox & other
> from TVPAD 3). Not sure is my Samsung 55 TV LCD
> issues since it works on my 24 Acer LCD monitor
> with HDMI input.
>
>
> padman Wrote:
>
>
> > That's very strange. Do you have another hdmi
> > cable you can try ?
> >
> >
> > owen Wrote:
> >
>
>
> >
> > > The same thing. I can press the setting up
> > button
> > > & select different mode ( 1080 50mz). But
> when
> > I
> > > return to the home menu, it keep flashing.
> > >
> > > I did try it on my 22 lcd monitor with HDMI
> > input.
> > > It works & NO flashing on main menu.
> > >
> > > Does it mean my Samsung 55 LCD doesn't work
> > with
> > > this little toy?
Did you try another HDMI in put because Samsung has some HDMI input for high Res.....
> Strange, shouldn't be related to the tv.
>
> I guess the only thing you could do is continue
>
> owen Wrote:
>
>
> > Blue ... Flashing Blue blank screen.... then
> > start up screen asking the (Asking English,
> > Cantonese or Mandarin language) ...... then
> > Flashing Blue blank screen again .... keep
> > continue ....??
Hi Mr Padman can you find out with UB box has setup PAL or NTSC by default ( because UB box made in HK) May be this the problem?
However, in the Settings -> Display. There is a HDMI output mode that you can set manually. Perhaps the OP need to manually set it for his big tv ?
Resolution | HZ
720p 50
720p 60
1080p 24
1080p 50
1080p 60
4k 30
cheuk5 Wrote:
> padman Wrote:
>
>
> > Strange, shouldn't be related to the tv.
> >
> > I guess the only thing you could do is continue
> >
> > owen Wrote:
> >
>
>
> >
> > > Blue ... Flashing Blue blank screen.... then
> > > start up screen asking the (Asking English,
> > > Cantonese or Mandarin language) ...... then
> > > Flashing Blue blank screen again .... keep
> > > continue ....??
>
> Hi Mr Padman can you find out with UB box has
> setup PAL or NTSC by default ( because UB box made
> in HK) May be this the problem?
Many Thanks